EV charger installation in Ipswich from BRIX Electrical and Air, family owned since 2021. Licensed, no subcontractors, and every quote is free and no-obligation.
4.9 stars
Ipswich's trusted team
Contact Us
BRIX Electrical and Air installs single-phase and three-phase EV chargers for homes across Ipswich. Energex estimates that around 90% of Queensland homes run single-phase power, so a 7.4kW charger on a dedicated circuit covers the majority of driveways. Homes with three-phase supply, larger battery capacity, or two cars to charge can go up to a three-phase unit instead.
Every installation includes a dedicated circuit and correct switchboard protection, handled by BRIX Electrical and Air from the first site visit through to testing and handover. See the full range of residential electrical services BRIX Electrical and Air provides across Ipswich.
Installing an EV charger in Ipswich got simpler on 1 October 2026. Energex and Ergon Energy Network withdrew the rule that forced 7kW (32A) home chargers onto a network control device, a controlled tariff, or a turned-down 20A setting.
Under the new 7kW charging rules, most Ipswich homes can now run a 32A charger at full rating on the main tariff. What still matters is whether your switchboard and service fuse can carry the load, and BRIX Electrical and Air checks that as part of every quote, not as an extra.
The network device is gone, but the load check is now squarely on your electrician. On an Ipswich job, that means:
Anything the job needs goes in your fixed written quote, and BRIX Electrical and Air handles any network paperwork on your behalf. You don’t manage that process yourself.
Three brands cover most of the EV charger installations BRIX Electrical and Air handles in Ipswich. The right one depends on what’s already running in your home.
SolaX
No solar or battery yet. SolaX is the standard pick, handling scheduling and load limiting without any extra complication.
Sungrow
Already running Sungrow solar or battery. A Sungrow charger keeps everything in the one app and the one ecosystem, which matters once you’re managing solar, battery and charging together.
Sigenergy
Already on Sigenergy. The Sigenergy charger sits inside the same gateway, so solar, battery and charging all run from one dashboard.
If you already have solar, the brand question matters more than it looks. Solar divert charging, using surplus solar before drawing from the grid, needs a charger with CT metering on your main tariff. Since the October 2026 rule change, that no longer needs a network control device. BRIX Electrical and Air’s solar battery installation team can confirm compatibility before you order.
Queensland Electrical Contractor Licence 88304, held and worked under directly.
Family owned and Ipswich based since 2021
No subcontractors, the crew that quotes the job installs it
Free, no-obligation quotes with no pressure to book
Member of Master Electricians Australia, and CEC accredited for solar and battery work.
One team for the electrical, solar, and switchboard work behind the charger
No. Most homes in the area run single-phase power, and a 7.4kW single-phase charger covers most daily driving comfortably. Three-phase only matters if your car’s onboard charger accepts 11kW or more, or you already have three-phase supply at the property and want to use it.
It depends on the board. Homes with ceramic fuses or no spare circuit space usually need attention first, and BRIX Electrical and Air sees this often on older Ipswich properties. Newer builds usually already have enough spare capacity on the existing board. The site visit confirms which applies to your home.
Cost depends on your switchboard’s condition, the cable run from the board to your parking space, and whether you need single or three-phase supply. BRIX Electrical and Air provides a fixed, written quote after a short site visit, so you know the full cost before any work starts.
Not for a standard home charger in most cases. Since 1 October 2026, a single-phase 32A charger no longer needs a network control device or a controlled tariff. If your load check shows a fuse or supply upgrade is needed, BRIX Electrical and Air lodges that with Energex on your behalf.
Yes, with the right setup. Charging your EV from solar during the day needs a charger with CT metering on your main tariff, and since the October 2026 rule change it can run at full rate. BRIX Electrical and Air’s solar battery installation team can confirm whether your existing system supports this before installation.
Call (07) 3060 9100 or send an enquiry through the contact form with your address and a note on your car. A short site visit comes first, followed by a fixed-price written quote, with no cost and no obligation to book from the quote itself.
BRIX Electrical and Air is family owned and Ipswich based since 2021, and does not use subcontractors. The same licensed crew that visits for the quote does the install, so there is one point of contact from start to finish.
BRIX Electrical & Air covers Ipswich, Brisbane, Logan, and surrounding South-East Queensland suburbs. Whether you’re in Redbank Plains, Springfield, Yeronga, or anywhere in between, get in touch and we’ll let you know if we service your area.
If you’re ready for EV charger installation in Ipswich, book a free, no-obligation quote with BRIX Electrical and Air. Call (07) 3060 9100 or send an enquiry online, and the team will confirm what your home and your car actually need before any work starts.
